Voodoo Lab Pedal Power ISO-5 Power Supply

The Voodoo Lab ISO 5 has the capabilities to power modern digital effects that need a lot of power such as the Eventide, Line 6, and TC Electronic devices thanks to its a high current output. It also includes an 18V output for higher voltage pedals to provide with extra headroom. The Voodoo Labs ISO 5 can be taken onto the stage since it delivers constant and clean power, even in poor AC line conditions that often occur in live situations. The advantages of fully isolated output sections are that they eradicate ground loops and interactions that are not wanted between effects pedals, giving you low noise and a much better overall tone.

The Pedal Power is powered directly from the mains using the supplied standard AC line chord that can easily be replaced if lost or damaged. Note that the ISO-5 is manufactured to operate from a specific supply voltage (100v, 120v or 240v) which is marked on the bottom of the unit. Using the wrong voltage has the potential to cause permanent damage. Please see the user manual PDF file for full safety information. For a capable power supply you can rely on in any situation, the Voodoo Labs ISO 5 is the device to choose.

The Voodoo Lab Pedal Power ISO- 5 box contains the following:

• Pedal Power ISO-5 unit
• Warranty card
• AC line cord
• DC Power cables:
• 5.5x2.1mm right angle barrel connectors (4)
• 5.5x2.1mm right angle to straight barrel connector (1)
• 5.5x2.5mm right angle “red” barrel (1)
• 3.5mm right angle mini plug (1)

   

   

  Features

  • Five isolated outputs
  • Compatible with all battery operated pedals
  • Includes high current 9V and 12V outputs, plus dedicated 18V output
  • Powers Boss Twin, Eventide, Line 6 modelers, TC Electronic Nova, Moog and more
  • Linear regulation and toroidal transformer for lowest possible noise
  • Compact design fits small pedalboards and rack shelves
  • Includes cables and detachable AC line cord
  • Engineered and handmade in the USA

     

  Specifications

  • Outputs:
  • 5.5x2.1mm barrel connectors center negative, short circuit protected
  • 9VDC (3) - 100mA
  • 9 and 12VDC - 400mA
  • 18VDC - 100mA
  • Dimensions: 4.9” wide x 3.4” deep x 1.8” tall (124 x 86 x 44 mm)
  • Weight: 0.56kg
  • Transformer: Toroidal power