The Voodoo Lab Pedal Power 2 Plus is the finest power supply available for guitar effects. The Pedal Power 2 Plus is used and abused by hundreds of top touring musicians who love it for its versatile outputs, bullet proof construction and super quiet operation.
The eight 9V outputs will power any type of battery operated effect. Each output is completed isolated, short-circuit protected, highly filtered and regulated. This insures reliable operation, free of hum and noise.
Pedal Power 2 Plus includes two high current outputs, capable of properly powering newer high power effects such as Boss Twin, Line 6 Modellers and TC Electronic Nova Pedals. It also features two variable voltage outputs to simulate worn batteries. Using an optional Voltage Doubler cable you can power many 18V and 24V effects as well.
Pedal Power 2 Plus Outputs
4 x Standard 9V DC or 12V DC Outputs
With each one of these four outputs delivering 100mA, you can easily power any 9V battery-operated pedals. Any of these outputs can be individually selected to run at 9V or 12V via switches underneath the Pedal Power 2 Plus.
2 x 9V High Current Outputs
These two outputs can delivery 250mA allowing you to run high current draw effects like the Boss DD-20 or Line 6 DL-4. These outputs can also power standard 9V effects as well.
2 x Standard 9VDC Outputs with Battery Sag Control
These outputs each have an available 100mA of power, but also allow you to SAG the voltage from roughly 4V to 9V via the bottom panel switches. This SAG control is very useful for transistor based fuzz, octavia and distortion circuits. You can also use it as a standard 9V output.
All the outputs on the Pedal Power 2 Plus are completely isolated allowing you to create different voltages. You can run 18V effects by combining two 9V outputs to create a single 18V output.
6 x PPBAR- R Right Angled Barrel Connectors 5.5 x 2.1mm
2 x PPBAR Straight Barrel Connectors 5.5 x 2.1 mm
1 x PPL6 Red Barrel Connector for Line 6 Pedals 5.5 x 2.5mm
1 x PPBAT Battery Snap Cable for powering cables without a power jack
1 x PPMIN 3.5mm mini plug for powering vintage MXR & EHX effects
To View the full range of Voodoo Lab Cables - Click Here.
Noise Free Operation
The Pedal Power 2 Plus uses a custom designed, ultra low noise toroidal transformer, with separate balanced windings for every output. Now even the most sensitive pedals can be dead quiet. Unlike other power supplies, Pedal Power 2 Plus isolates every output. This eliminates tone robbing interaction between units. Now you can properly power everything from vintage overdrives to modern digital delays that others just can't.
Each output of the Pedal Power 2 plus is short protected. This means that if you have a short in a power cable, or one of your pedals malfunctions, PP 2 Plus will temporarily turn off the power to that pedal. All other outputs will continue to function with no long term damage.